1111 ENGINE BLOCK (X6 xDrive 50i)
1111 ENGINE BLOCK - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Bearing cap to crankcase (ASA collar bolt) | N63 O1 | M11x99 | Replace bolts, screw in hand-tight Joining torque Angle of rotation |
20 Nm 115° |
| 2AZ Bearing cap to crankcase (ASA collar bolt 10.9) | N63 O1 | M8x70 | Replace screws. Joining torque Angle of rotation |
10 Nm 55° |
| 3AZ Threaded support sleeves | N63 O1 | Joining torque | 6 Nm | |
| 4AZ Angled screw connection to crankcase | N63 O1 | M8x37 | Flanged head screw 10.9 Joining torque Angle of rotation |
10 Nm 45° |
| 5AZ Screw plug, gutter strip | N63 O1 | M14x1.5 | Replace gasket. | 25 Nm |
| 6AZ Screw plug, main oil gallery rear and in V-space right | N63 O1 | M18x1.5 | Replace gasket. | 25 Nm |
| 7AZ Oil nozzle to crankcase | N63 O1 | M12x1 | 10 Nm | |
| 8AZ Special tool to crankcase | N63 O1 | M8x35 | 20 Nm | |
| 9AZ Special tool to crankcase | N63 O1 | M10x35 | 40 Nm | |
| 10AZ Special tool 11 8 930 to special tool 00 2 300 | N63 O1 | M14x35 | 160 Nm |