51 47 135 Removing and installing/replacing left or right lashing rail in luggage compartment floor (X6 2015-2019)

Necessary preliminary tasks:

Removal:

Release clamps (1).

Unfasten screws (2 and 3).

Feed out lashing rail (4) towards the inside and remove it.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

NOTE: Mask trim on the tail panel around the rail to prevent scratches.

IMPORTANT: Risk of mixing up
Different screws fitted.

Feed in lashing rail (4).

Fasten clips (1).

Tighten down screws (2 and 3).

Tightening torque 51 71 15AZ .

Required follow-up work:

Courtesy of BMW OF NORTH AMERICA, INC.