51 23 265 Removing and installing/replacing left or right gas pressure spring for engine compartment lid (X6 2015-2019)
WARNING:
Danger of injury and damage!
For the following tasks, you must take the appropriate measures to support the engine compartment lid.
As an alternative, you can enlist the help of a second person to hold the engine compartment lid.
For the following tasks, you must take the appropriate measures to support the engine compartment lid.
As an alternative, you can enlist the help of a second person to hold the engine compartment lid.
Necessary preliminary tasks:
- Remove microfilter housing covers. Refer to 64 31 101 REMOVING AND INSTALLING/REPLACING LEFT MICROFILTER HOUSING COVER REP-REP-RAF1564-6431101 - V.3 (X6 2015-2019) and 64 31 106 REMOVING AND INSTALLING/REPLACING RIGHT MICROFILTER HOUSING COVER REP-REP-RAF1564-6431106 - V.3 (X6 2015-2019) .
Make a written record of the installation position of the gas pressure spring(s) before removing.
Carry out BALL SOCKET REMOVAL at both ends (1) of gas pressure spring (2).