LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2017 >> X6 sDrive35i >> Repair and Diagnosis >> Drivelines & Axles >> Driveshaft & Universal Joints >> Propeller Shaft -- Repair X6 (F16) >> 26 00 Propeller Shaft, General >> Additional work on all-wheel drive vehicles after driving with faulty (non-engaging) drive (X6 xDrive 35i, X6 xDrive 50i)

Additional work on all-wheel drive vehicles after driving with faulty (non-engaging) drive (X6 xDrive 35i, X6 xDrive 50i)

IMPORTANT: If the vehicle has been shifted under engine power with a non-engaging drive system (e.g. faulty front prop shaft, or one output shaft is no longer engaging with the drive flange, rear axle differential faulty/no power transmission), it is mandatory to calibrate the transfer box after having repaired the prop shaft/output shaft(s).

Carry out calibration after having completed the repair using the diagnostic system and information system, in control unit function -

Functional check - Transfer box.

scientia non olet · About LEMON Manuals