66 20 534 Removing and installing/replacing a rear left ultrasonic transducer (Park Distance Control) (X6 2015-2019)
WARNING:
Risk of burning!
Work on the exhaust system may only be carried out when it has cooled down!
Work on the exhaust system may only be carried out when it has cooled down!
NOTE:
Ultrasonic transducers (1) can be removed without the bumper panel being removed.
Release retaining tabs (1).
Pull ultrasonic transducer out of bracket and disconnect plug connection (2).
Installation note:
Before installation of ultrasonic sensor on wiring harness, clean plug connection!
Installation note:
Make sure rubber ring (1) is correctly seated on ultrasonic sensor (2).