Replacing right engine support arm (S63) (X6 M)

Necessary preliminary tasks: 

• Secure ENGINE in installation position.
• Remove REINFORCEMENT PLATE .
• Remove RIGHT STEERING GEAR COVER .
• Release TRACK ROD on steering box.

Removal: 

Release bolts (1) and remove engine support arm.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Install engine support arm.

Insert screws (1) and tighten.

Tightening torque 22 11 3AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

• Mount TRACK ROD to steering gear.
• Install COVER FOR STEERING GEAR AT RIGHT .
• Install REINFORCEMENT PLATE .
• Remove the ENGINE SUPPORT BEAM .