32 41 Power Steering Pump And Hydraulic Oil Supply (X6 M)
32 41 PUMP AND OIL SUPPLY - TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Oil reservoir to holder | F15/F16/F85/F86 | M6 | 5 Nm | |
| 2AZ Belt pulley to vane pump/power steering pump | N55/N63/S63 | M8 8.8 | Replace microencapsulated screws. | 20 Nm |
| N57 (Vane pump/hydraulic pump with sintered flange) | M8 | Replace microencapsulated screws. | 24 Nm | |
| N57 (Vane pump/hydraulic pump with steel flange) | M8 | Replace microencapsulated screws. | 28 Nm | |
| 3AZ Hydraulic pump/power steering pump to engine | F15 N57/F16 N57 | M10 | 38 Nm | |
| F15 N55/F16 N55 | M10x35 | 38 Nm | ||
| F15 N63/F16 N63/F85 S63/F86 S63 | M10x45 | 38 Nm | ||
| F15 N63/F16 N63/F85 S63/F86 S83 | M10x130 | 40 Nm | ||
| 4AZ Pressure line for hydraulic steering to vane pump/power steering pump | F15 N57, N63/F16 N57, N63 | M8x35 | Replace sealing ring. | 28 Nm |
| 5AZ Pressure line to hydraulic steering gear | F15/F16 | M14x1.5 | Replace all sealing rings. | 30 Nm |
| 6AZ Return line to hydraulic steering gear | F15/F16 | M16x1.5 | Replace all sealing rings. | 35 Nm |
| 7AZ Mounting, hydraulic lines | F15/F16/F85/F86 | M6 | 8 Nm | |
| 8AZ Intake pipe to power steering pump (hose clamp) | F15/F16/F85/F86 | 2.5 Nm | ||
| 9AZ ARS expandable hose part 1 to hydraulic pump | F15/F16/F85/F86 | M6x20 | 12 Nm | |
| 10AZ Separation point ARS/active steering expandable hose part 1 to part 2 | F15/F16/F85/F86 | M6x20 | 12 Nm | |
| 11AZ Holder to crankcase | F15/F16 | M12 | 66 Nm | |
| 12AZ Deflecting element belt drive to engine | F15/F16 | 28 Nm |