33 32 Rear Trailing Arms And Struts (X6 M)
33 32 AXLE GUIDE AND AXLE STRUT - TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Swinging arm to rear axle carrier, front | F15/F16/F85/F86 | M12 | Replace screw and nut. Tighten in NORMAL POSITION . |
|
| Joining torque | 100 Nm | |||
| Angle of rotation | 90° | |||
| 2AZ Swinging arm to rear axle support, rear | F15/F16/F85/F86 | M16 | Replace eccentric bolt and nut. Tighten in NORMAL POSITION . |
250 Nm |
| 3AZ Swinging arm to wheel carrier/integral link | F15/F16/F85/F86 | M16 | Replace screw and nut. | |
| Joining torque | 130 Nm | |||
| Angle of rotation | 180° | |||
| 4AZ Integral link to wheel carrier | F15/F16/F85/F86 | M12 | 100 Nm | |
| 5AZ Control arm to rear axle support | F15/F16/F85/F86 | M14 | Replace eccentric bolt and nut. Tighten in NORMAL POSITION . |
100 Nm |
| 6AZ Control arm to wheel carrier | F15/F16/F85/F86 | M12 | Replace nut. | 100 Nm |
| 7AZ Control arm to rear axle support | F15/F16/F85/F86 | M12 | Replace screw and nut. Tighten in NORMAL POSITION . |
|
| Joining torque | 100 Nm | |||
| Angle of rotation | 90° | |||
| 8AZ Wishbone to wheel carrier | F15/F16/F85/F86 | M14 | Replace nut. | 165 Nm |