Remove holder for engine wiring harnesses (N63 B40/B44 O 1, S63 B44 T 2) (X6 M)

Necessary preliminary tasks: 

• Switch off ignition.
• Remove ACOUSTIC COVER .

Release screws (1).

See: TIGHTENING TORQUE .

Release coolant line and cable from the holder for the wiring harness.

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

See: TIGHTENING TORQUE .

Release cable from the holder for the wiring harness.

Courtesy of BMW OF NORTH AMERICA, INC.

Release lock (1) and remove all cables from holder.

Feed out holder and remove.

Courtesy of BMW OF NORTH AMERICA, INC.