61 14 Power Distribution, Power Connection Points (X6 M)
61 14 POWER DISTRIBUTION BOX, CURRENT TERMINALS F15, F16, F85, F86 - TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Front power distribution box (footwell) to instrument panel carrier support | F15/F16/F85/F86 | Screw | 8.0 Nm | |
| 2AZ Rear power distribution box (side of luggage compartment) | F15/F16/F85/F86 | M6x11 | 8.0 Nm | |
| 3AZ Jump start terminal point/transfer terminal point to bracket | F15/F16/F85/F86 | Screw | 8.0 Nm | |
| 4AZ Positive battery cable to jump start terminal point/transfer terminal point | F15/F16/F85/F86 | M8 | 15.0 Nm | |
| 5AZ Power distribution box (engine compartment) to holder | F15/F16/F85/F86 | Screw | 8.0 Nm | |
| 6AZ Power distribution box (engine compartment) to partition wall | F15/F16/F85/F86 | Screw | 2.8 Nm | |
| 7AZ Power distribution box (footwell, side) to holder | F15/F16/F85/F86 | K50x16 | 2.6 Nm | |
| 8AZ Power distribution box (luggage compartment) on battery holder | F15/F16/F85/F86 | Nut | 2.5 Nm |
61 14 TIGHTENING TORQUE OVERVIEW
| Line to PCU48 | ||
| Nut M8 | tightening torque | 15 Nm |