13 62 Sensor For Control Unit (X6 M)
13 62 SENSORS FOR CONTROL UNIT - TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Coolant temperature sensor | N63 B40 O 1/N63 B44 O 1 | M12x1.5 | 18.5 Nm | |
| S63 B44 T 2 | 13.5 Nm | |||
| 2AZ Pressure sensor to intake manifold | N63 B40 O 1/N63 B44 O 1 | 2 Nm | ||
| 3AZ Camshaft sensor to cylinder head | N63 B40 O 1/N63 B44 O 1 | 8 Nm | ||
| S63 B44 T 2 | 8 Nm | |||
| 4AZ Crankshaft sensor to transmission | N63 B40 O 1/N63 B44 O1 | M6 | 8 Nm | |
| S63 B44 T 2 | M6 | 8 Nm | ||
| 5AZ Knock sensor to crankcase | N63 B40 O 1/N63 B44 O 1 | M8 | 21.5 Nm | |
| S63 B44 T 2 | M8 | 21.5 Nm | ||
| 6AZ Hot film air-mass meter to intake filter housing | N63 B40 O 1/N63 B44 O 1 | 3.5 Nm | ||
| S63 B44 T 2 | 5 Nm | |||
| 7AZ Pressure sensor to intercooler | N63 B40 O 1/N63 B44 O 1 | M6 | 3.2 Nm | |
| S63 B44 T 2 | K50X14 | 3 Nm |