18 32 Exhaust Gas Catalytic Converter (X6 M)
18 32 CATALYTIC CONVERTER - TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Catalytic converter to turbocharger | N63 B40 O 1/N63 B44 O 1 | V-clamp | Replace V-band clamp. | 13 Nm |
| S63 B44 T 2 | V-clamp | Replace V-band clamp. | 13 Nm | |
| 2AZ Catalytic converter holder, inlet funnel to cylinder head | N63 B40 O 1/N63 B44 O 1 | M8 | 19 Nm | |
| S63 B44 T 2 | M8 | 19 Nm | ||
| 3AZ Catalytic converter to cylinder head | N63 B40 O 1/N63 B44 O 1 | M8 | 19 Nm | |
| S63 B44 T 2 | M8 | 19 Nm | ||
| 4AZ Catalytic converter to holder | N63 B40 O 1/N63 B44 O 1 | M8 | 23 Nm | |
| S63 B44 T 2 | M8 | 23 Nm |