11 21 Crankshaft With Bearing (X6 M)
11 21 CRANKSHAFT AND BEARINGS - TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Increment wheel on crankshaft Increment wheel on crankshaft Increment wheel on crankshaft |
S54 | M5 10.9 | Replace screws | |
| Joining torque | 5.0 Nm | |||
| Torque angle | 45° | |||
| M5 10.9 | Replace screws | 13 Nm | ||
| M5 8.8 | Replace screws | 5.5 Nm |