11 14 Housing Cover (X6 M)
11 14 CASE COVERS - TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Jump guard to crankcase cover | S63T 2 | M6x25 | 10 Nm | |
| 2AZ Gear case cover to crankcase, bottom | S63T 2 | M8x45 M8x55 M8x65 M8x85 |
24 Nm | |
| 3AZ Gear case cover to top of cylinder head, left and right | S63T 2 | M6x20 | 10 Nm | |
| 4AZ End cover (oil) to crankcase (transmission side) | S63T 2 | M6x30 | Observe.TIGHTENING SEQUENCE | 10 Nm |
| 5AZ End cover (water) to crankcase (transmission side) | S63T 2 | M6x18 | Observe TIGHTENING SEQUENCE. | 11 Nm |