Removing and installing/replacing pressure accumulator (S63T2) (X6 M)

Necessary preliminary tasks: 

• Remove ACOUSTIC COVER .

Removal: 

Vacuum reservoir, left.

Pull vacuum hoses off the vacuum reservoir.

Slacken nut (1).

Remove vacuum reservoir (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Position vacuum reservoir.

Tighten nut (1).

Tightening torque 11 65 6AZ .

Attach vacuum hoses to the vacuum reservoir.

Courtesy of BMW OF NORTH AMERICA, INC.

Check vacuum connections for correct routing.

Check the vacuum system for tightness.

Assemble engine.

Required reworking: 

• Install the ACOUSTIC COVER .