Removing and installing/replacing flywheel (S63T2) (X6 M)

Special tools required: 

• 11 9 260

Necessary preliminary tasks: 

• Remove AUTOMATIC TRANSMISSION .

Secure flywheel (1) with special tool 11 9 260.

Courtesy of BMW OF NORTH AMERICA, INC.

Release flywheel screws in area (1).

Remove flywheel (2).

Installation note: 

Clean threads on flywheel screws in crankshaft.

Flywheel (2) is secured with an alignment pin.

Fit flywheel (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Fit new flywheel screws  .

Tightening torque 11 22 1AZ .