Removing and installing/replacing trim on D-pillar at bottom left or right (X6 M)

Necessary preliminary tasks: 

• Remove FLAP IN LUGGAGE COMPARTMENT TRIM PANEL .

Removal: 

Release screw (1).

Detach and remove trim panel (2) forward out of clip.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Courtesy of BMW OF NORTH AMERICA, INC.

Install trim panel (2) and latch into clip.

Tighten screw (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

• Install FLAP IN LUGGAGE COMPARTMENT TRIM PANEL .