26 11 Propeller Shaft, One-Part Or Multi-Part (X6 M)
26 11 PROPELLER SHAFT. COMPLETE - TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Front flexible disc to transmission output flange ZNS screws and nuts All versions Replace screws and nuts, joining torque and angle of rotation must be observed without fail. Tightening via screw |
F01/F02/F03/F06/F07/F10/F11/F12/F13/F15/F16/F18/F20/F21/F22/F23/F25/F26/F30/F31/F32/F33/F34/F35/F36/F80/F82/F83/F85/F86/F18 PHEV/F15 PHEV/F87/F30 PHEV | M12-10.9 | Joining torque | 55 Nm |
| Angle of rotation | 90° | |||
| 2AZ Front flexible disk to propeller shaft ZNS screws and nuts All versions Replace screws and nuts, joining torque and angle of rotation must be observed without fail. |
F01/F02/F03/F06/F07/F10/F11/F12/F13/F15/F16/F18/F20/F21/F22/F23/F25/F26/F30/F31/F32/F33/F34/F35/F36/F80/F82/F83/F85/F86/F18 PHEV/F15 PHEV/F87/F30 PHEV | M12-10.9 | Joining torque | 55 Nm |
| Angle of rotation | 90° | |||
| 3AZ Flexible disc, rear, to transmission drive flange (inserted) ZNS screws and nuts All versions Replace screws and nuts, joining torque and angle of rotation must be observed without fail. Tightening via screw |
F01/F02/F03/F06/F07/F10/F11/F12/F13/F18/F20/F21/F22/F23/F30/F31/F32/F33/F34/F36/F85/F86/F18 PHEV | ASA M12-10.9 | Joining torque | 55 Nm |
| Angle of rotation | 90° | |||
| 4AZ Flexible disc, rear, to propeller shaft ZNS screws and nuts All versions Replace screws and nuts, joining torque and angle of rotation must be observed without fail Tighten via nut |
F01/F02/F03/F06/F07/F10/F11/F12/F13/F18/F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36/F85/F86/F18 PHEV | M12-10.9 | Joining torque | 55 Nm |
| Angle of rotation | 90° | |||
| 5AZ Center mount to body | F01/F02/F03/F06/F07/F10/F11/F12/F13/F15/F16/F18/F20/F21/F22/F23/F25/F26/F30/F31/F32/F33/F34/F35/F36/F85/F86/F18 PHEV/F15 PHEV/F87/F30 PHEV | 19 Nm | ||
| 6AZ Input flange, rear axle final drive (insert nut to propeller shaft/three-hole flange) | F01/F02/F03/F06/F07/F10/F11/F12/F13/F18/F15/F16/F20/F21/F22/F23/F25/F26/F30/F31/F32/F33/F34/F35/F36/F85/F86 PHEV/F15 PHEV/F87/F30 PHEV | Replace insert nut! Allow min. 2 hours hardening time | 100 Nm | |
| 7AZ Front propeller shaft to transfer box/front axle differential. Replace screws, joining torque and angle of rotation must be observed without fail. | F01/F02/F06/F07/F10/F11/F12/F13/F15/F16/F20/F21/F22/F23/F25/F26/F30/F31/F32/F33/F34/F36/F85/F86/F15 PHEV | Joining torque | 20 Nm | |
| Angle of rotation | 45° | |||
| 8AZ Constant velocity joint propeller shaft to rear axle differential. Replace screws and shims, joining torque and angle of rotation must be observed without fail. | F06 M6/F10 M5/F12 M6/F13 M6 | M10 | Joining torque | 20 Nm |
| Angle of rotation | 90° | |||
| 9AZ Front propeller shaft to rear propeller shaft/constant velocity joint | F06 M6/F10 M5/F12 M6/F13 M6 | M12x1 | 60 Nm |
26 11 TIGHTENING TORQUE OVERVIEW
| Propeller shaft on the rear axle differential | ||
| Tightening torque | 85 Nm | |