Adjusting head-up display (X6 M)
NOTE:
Vehicles with head-up displays are fitted with special windshields.
These windshields are marked with the letters "HUD" on the outside at the bottom right below the seal (1) .
Prior to adjustment, fold seal (1) back, if necessary remove windshield panel cover on right, and make sure that a correct windshield is installed.
These windshields are marked with the letters "HUD" on the outside at the bottom right below the seal (1) .
Prior to adjustment, fold seal (1) back, if necessary remove windshield panel cover on right, and make sure that a correct windshield is installed.
Connect vehicle to BMW diagnostic system.
Select service function under following path:
- Service function
- Body
- Head-Up Display
- Adjusting head-up display
NOTE:
The geometric representation of the Head-Up Display can be adjusted with the service function.