Replacing the handle on the luggage compartment trim panel
- Loosen screws (1).
- Disconnect both parts (3) of the handle from each other at the locks (2).
Check
- Check the lock (2) of the molded recess (1) for damage.
- Check the springs (3) of the molded recess (1) for damage.
- Check the locks (4) of the molded recess (1) for damage.
Result
» One or more components are damaged.
Measure
- Replace the handle.
Parts: Handle
- Engage both parts (3) of the handle at the locks (2).
- Tighten screws (1).