Removing and installing/replacing door window glass, front left or right (X6 M)
Necessary preliminary tasks:
- Remove SOUND INSULATION ON FRONT DOOR .
- Remove INNER WEATHER STRIP .
Open door window glass (1) down to distance (A)
NOTE:
Open door window until the sliding member of the door window glass holder is level with the slot of the window regulator.
- approx. 95 mm
IMPORTANT:
Danger of injury by trapping!
Disconnect plug connection (1) on power window motor.
Carefully press latch mechanism (2) with screwdriver (3) rearwards and slide door window glass upwards.
Installation note:
Latch mechanism (2) must be correctly clipped in.
Carry out function check on power window regulator and anti-trap mechanism.
If necessary, NORMALIZE power window unit.
Turn door window glass and lift out rearwards/top.
Installation note:
Side window glass does not need to be adjusted.