Removing and installing/replacing right engine compartment lid lock. (X6 M)

For vehicles with N63 and N55 engine only:

Unclip coupling (1) from side panel.

Lever out cover (2) at coupling (1).

Lever Bowden cable (3) out of coupling (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip Bowden cable (1) from holder (2).

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Illustration shows A/C lines and module carrier cover removed for purposes of clarity.

Release screws (1).

Tightening torque 51 23 2AZ .

Feed out engine compartment lock (2) via aperture (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1), unclip plug and cable from body.

Detach Bowden cable (1) from engine compartment lock (3).

Courtesy of BMW OF NORTH AMERICA, INC.