11 41 115 Removing and installing/replacing the hydraulic valve (PHEV)

WARNING: High-voltage system - danger to life

Removal:

Installation location: next to left engine support arm

Detach connector from hydraulic valve (2).

Release screw (1).

Remove hydraulic valve (2).

Fig 1: Identifying Hydraulic Valve And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Replace O-ring (1).

Fig 2: Identifying O-Ring

Courtesy of BMW OF NORTH AMERICA, INC.

Position hydraulic valve (2).

Tighten screw (1).

Tightening torque: 11 41 4AZ .

Insert plug connector from hydraulic valve (2).

Fig 3: Identifying Hydraulic Valve And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.

Check function of Digital Engine Electronics.

Diagnosis path: