11 37 Variable valve gear
TIGHTENING TORQUE SPECIFICATION - VARIABLE VALVE GEAR
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Slide block to cylinder head. | N55 | M6x23 | 10 Nm | |
| 2AZ Torsion spring (throttle return spring) to cylinder head. | N55 | M6x20 | 10 Nm | |
| 3AZ Electrical servomotor to cylinder head. | N55 | M6x16 | 10 Nm | |
| 4AZ Oil spray nozzle to guide block. | N55 | M6x30 | 10 Nm | |
| 5AZ Stop screw of eccentric shaft to cylinder head. | N55 | M6 | 10 Nm | |
| 6AZ Valvetronic sensor to holder. | N55 | M6x20 | 8 Nm | |
| 7AZ Holder for Valvetronic sensor. | N55 | M6x20 | 8 Nm |