11 12 Cylinder head with lid
TIGHTENING TORQUE SPECIFICATION - CYLINDER HEAD WITH LID
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Cylinder head bolts (steel bolt) | N57 D30 U/O 1 | M12x1.5 x200 | Replace screws Tighten bolts from middle in diagonal sequence in outward direction. 1. Jointing torque 2. Angle of rotation 3. Angle of rotation |
50 Nm 120 ° 120 ° |
| 2AZ Chain tensioner, top | N57 D30 U/O 1 | M22x1.5 | 70 Nm | |
| 3AZ Guide rail to cylinder head | N57 D30 U/O 1 | M16x1.5 | Bearing journal | 20 Nm |
| 4AZ Cylinder head cover to cylinder head 5AZ Radiator supply connection fittings to cylinder head |
N57 D30 U/O1 N57 D30 U/O1 |
M6 M6x25 |
Replace all seals Replace gasket |
9 Nm 8 Nm |