11 27 Dual-mass balance
TIGHTENING TORQUE SPECIFICATION - DUAL-MASS BALANCE
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Camshaft sprocket to counterbalance shaft and crankcase | N20/N26 | M10x1.5 | 12.9 screw | 95 Nm |
| 2AZ Counterbalance shaft housing to crankcase | N20/N26 | M18 x 75 M8 x 40 |
15 Nm | |
| 3AZ Counterbalance shaft housing to crankcase | N20/N26 | M6 x 25 | 10 Nm |