11 14 Case Covers
TIGHTENING TORQUE SPECIFICATION - CASE COVERS
| |
Type |
Thread |
Tightening specifications |
Dimension |
| 1AZ Screw plug to gear case cover |
N57 D30 U/O/T 1 |
M34x1.5 |
Replace sealing cap |
20 Nm |
| 2AZ End cover to crankcase |
N57 D30 U/O/T 1 |
M6x31 |
Replace screws
Jointing torque
Angle of rotation |
8 Nm
90 ° |