11 61 362 Removing and installing/replacing right charge air line (PHEV)

WARNING: High-voltage system - danger to life

Removal:

Unlock snap fastener (1) and (2) and remove the charge air guide.

NOTE: Shown with engine/cooling package removed for better overview.

Fig 1: Identifying Snap Fastener

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Installation note:

Visually inspect the form sealing ring (1) for correct position and damage.

VDA couplings are correctly fitted when they snap into place with an audible click.

Fig 2: Identifying Sealing Ring

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Visually inspect the form sealing ring (1) for correct position and damage.

VDA couplings are correctly fitted when they snap into place with an audible click.

Fig 3: Identifying Sealing Ring

Courtesy of BMW OF NORTH AMERICA, INC.

Position charge air line, snap fastener (1) and (2) must engage audibly.

Fig 4: Identifying Snap Fastener

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.