11 61 086 Removing and installing/replacing mixing tube for intake air (N57)

Necessary preliminary tasks:

Release screws (1).

Unfasten screws (2).

Disconnect plug connection (3).

Remove mixing tube.

Fig 1: Identifying Plug Connection And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Replace O-ring (1).

Replace gasket (2).

Fig 2: Identifying O-Ring And Gasket

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Pay attention to mounting lugs (1).

Remove mixing tube in direction of arrow.

Fig 3: Removing Mixing Tube

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.