62 30 010 Removing and installing/replacing Head-Up Display

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION) .

IMPORTANT: Comply with notes on HANDLING OPTICAL FIBRES .
Risk of damage!
Do not scratch lens of head-up display.

Necessary preliminary tasks:

Remove seal (1) from head-up display (2).

Fig 1: Identifying Seal And Head-Up Display

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Carefully feed out head-up display (2) in upward direction.

Fig 2: Identifying Head-Up Display And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten electrical connector (1) on head-up display (2) and disconnect.

Remove head-up display (2).

Installation note:

Clean lens of head-up display.

Fig 3: Identifying Electrical Connector On Head-Up Display

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: