51 16 026 Replacing mirror glass for exterior mirror
Special tools required:
WARNING:
Move mirror glass with hand carefully and slowly.
If mirror glass is damaged:
Wear protective goggles and cut-proof gloves.
Danger of injury by flaking-off glass splinters.
IMPORTANT:
Bring exterior mirror to room temperature to prevent catches from breaking off.
Remove glue between mirror glass and edge of housing (risk of damage).
Secure mirror glass against falling out.
Remove glue between mirror glass and edge of housing (risk of damage).
Secure mirror glass against falling out.
Press mirror glass (1) at top by hand to full extent.
NOTE:
Secure mirror glass (1) against falling out.
Unclip mirror glass (1) at bottom with special tool 00 9 317 .
Disconnect associated plug connections and remove mirror glass (1).
Installation note:
Retaining lugs (1) must not be damaged.
Fit mirror glass (2) with retaining lugs (1) flush on mirror adjusting drive and clip into place.
Ensure correct locking.
NOTE:
Check mirror adjustment for correct function