51 45 376 Removing and installing/replacing decorative strip on left fresh air grille

Special tools required:

When working on trim panel components, make sure that visible surfaces are not scratched or damaged (e.g. by sharp-edged tools).

Loosen decorative strip (1) using special tool 00 9 325 from latch mechanisms (2) and remove.

Installation note:

Catches (2) must not be damaged or missing.

Fig 1: Loosening Decorative Strip Using Special Tool (00 9 325)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Replace faulty clamps (1).

Ensure clamps (1) are seated correctly.

Fig 2: Identifying Clamps

Courtesy of BMW OF NORTH AMERICA, INC.