51 23 100 Removing and installing/replacing right engine compartment lid lock

For vehicles with N63 and N55 engine only:

Unclip coupling (1) from side panel.

Lever out cover (2) at coupling (1).

Lever Bowden cable (3) out of coupling (1).

Fig 1: Identifying Coupling, Cover And Cable

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip Bowden cable (1) from holder (2).

Fig 2: Removing Bowden Cable From Holder

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Illustration shows A/C lines and module carrier cover removed for purposes of clarity.

Release screws (1).

Tightening torque 51 23 2AZ .

Feed out engine compartment lock (2) via aperture (3).

Fig 3: Feeding Out Hood/Bonnet Lock Through Opening

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1), unclip plug and cable from body.

Detach Bowden cable (1) from engine compartment lock (3).

Fig 4: Detaching Bowden Cable From Engine Compartment Lock

Courtesy of BMW OF NORTH AMERICA, INC.