51 71 016 Removing and installing/replacing left and right underbody panelling
Necessary preliminary tasks:
- Underbody panelling must not be jammed by vehicle hoist.
If necessary, fit suitable blocks under vehicle jacking points.
NOTE:
Description of work is illustrative, some details may differ on other models.
Left side:
Release all screws along dashed line (1).
Remove underbody panelling (2).
Installation note:
Ensure underbody panelings (2) are fitted correctly.
Right side:
Release all screws along dashed line (1).
Remove underbody panelling (2).
Installation note:
Ensure underbody panelings (2) are fitted correctly.