64 53 518 Replacing desiccant insert for A/C system (capacitor removed)

Special tools required:

00 9 030

IMPORTANT: Risk of damage!

Restart engine only when A/C system has been correctly filled.

Follow notes for OPENING AND REPLACING PARTS IN REFRIGERANT CIRCUIT .

If air conditioning system is opened for more than 24 hours: Replace DESICCANT INSERT for A/C system

Follow INSTRUCTIONS ON REPLACING DESICCANT INSERT .

Remove protective cap (1) from capacitor for the heating and air conditioning system (2).

Fig 1: Identifying Capacitor And Protective Cap

G06886377

Courtesy of BMW OF NORTH AMERICA, INC.

Press sealing cap (1) inwards and remove circlip (2).

Fig 2: Pressing Sealing Cap

G04761899

Courtesy of BMW OF NORTH AMERICA, INC.

Remove the sealing cap (2) from capacitor of the heating and air conditioning system (3) with an inserted screw (1).

Fig 3: Removing Sealing Cap From Capacitor

G04761900

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Replace sealing rings (1).

Use special tool 00 9 030 to fit sealing rings (1) without damaging them.

Fig 4: Installing Sealing Rings Using Special Tool (00 9 030)

G04761901

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Risk of damage!
Removal is made more difficult if rib (2) is damaged!

Fig 5: Removing Desiccant Insert For Heating And Air Conditioning System

G04792672

Courtesy of BMW OF NORTH AMERICA, INC.

Remove desiccant insert for heating and air conditioning system (1) in direction of arrow from capacitor of the heating and air conditioning system (2).

After installation:

EVACUATE AND FILL air conditioning