11 12 Cylinder head with cylinder head cover
TIGHTENING TORQUE SPECIFICATION - CYLINDER HEAD WITH CYLINDER HEAD COVER
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Cylinder head bolt | N63 O1 | M11 x 1.5 | Replace screws. Jointing torque 1. Angle of rotation 2. Angle of rotation |
30 Nm 90 ° 140 ° |
| 2AZ Cylinder head bolt to gear case cover | N63 O1 | M8x30 | 23 Nm | |
| 3AZ Cylinder head cover to cylinder head. | N63 O1 | M6x30 M6x70 |
10 Nm | |
| 4AZ Sealing cap to cylinder head. | N63 O1 | M6 | 10 Nm | |
| 5AZ Securing eye to cylinder head. | N63 O1 | M8x22 | 22 Nm | |
| 6AZ Non-return valve | N63 O1 | M14x1.5 | 20 Nm | |
| 7AZ Ventilation connection | N63 O1 | M8x1 | Replace sealing ring. | 15 Nm |
| 8AZ Oil filler neck to cylinder head cover. | N63 O1 | M6x20 | Replace sealing ring. | 14 Nm |
| 9AZ Screw plug to rear of cylinder head | N63 O1 | M10x1 | Replace sealing ring. | 12 Nm |
| 10AZ Connecting branch to cylinder head cover | N63 O1 | M6x18 | 10 Nm | |
| 11AZ Engine ventilation to cylinder head cover | N63 O1 | M6x20 | Replace sealing ring. | 10.5 Nm |