11 36 Variable Camshaft Control
TIGHTENING TORQUE SPECIFICATION - VARIABLE CAMSHAFT CONTROL
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ VANOS with sensor wheel to inlet and exhaust camshafts | N55 | M10x94 | Replace screw Jointing torque Torque angle |
20 Nm 180 ° |
| 2AZ Non-return valve VANOS to cylinder head | N55 | M14 x 1.5 | 13 Nm | |
| 3AZ Solenoid valve holder to cylinder head | N55 | M6x12 | 9 Nm |