11 00 Standard screw connection
TIGHTENING TORQUE SPECIFICATION - STANDARD SCREW CONNECTION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Screws and nuts | N57 D30 U/O 1 | M5 | 5 Nm ± 0.5 | |
| 2AZ Screws and nuts | N57 D30 U/O 1 | M6 | 8 Nm±1 | |
| 3AZ Screws and nuts | N57 D30 U/O 1 | M7 | 13 Nm±2 | |
| 4AZ Screws and nuts | N57 D30 U/O 1 | M8 | 19 Nm±3 | |
| 5AZ Screws and nuts | N57 D30 U/O 1 | M10 | 38 Nm±5 | |
| 6AZ Hose clamp, width across flats 5 | N57 D30 U/O 1 | 1.0 to 1.5 Nm | ||
| 7AZ Hose clamp, width across flats 6 | N57 D30 U/O 1 | 2.5 up to3.5 Nm |