51 34 160 Removing and installing/replacing cover on window frame (rear door) at inside left or right

Necessary preliminary tasks:

Equipment specification with roller sunblind:

Lift off cover (1).

Undo the screw underneath and take off hook (2).

Fig 1: Lifting Off Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Detach cover (1) at clips (2).

Lever out cover (1) in direction of arrow and remove.

Installation note:

Make sure cover (1) is correctly seated on seal (3).

Fig 2: Removing Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Correctly feed cover (2) into joint of rubber window seal (1).

Fig 3: Feeding Cover Into Joint Of Rubber Window Seal

Courtesy of BMW OF NORTH AMERICA, INC.