51 41 017 Removing and installing/replacing cover on front right door handle (front passenger side)

Special tools required: 

• 2 298 505

When working on trim panel components, make sure that visible surfaces are not scratched or damaged (e.g. by sharp-edged tools).

Unfasten cover (1) from clamps (2) using special tool 2 298 505 .

Installation note: 

Replace faulty clamps (2).

Fig 1: Removing Cover From Clamps Using Special Tool (2 298 505)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Latch mechanisms must not be damaged or missing.

Fig 2: Locating Latch Mechanisms

Courtesy of BMW OF NORTH AMERICA, INC.