51 47 126 Replacing handle on trim panel for luggage compartment floor

Release screws (1).

Separate both handle halves (3) from each other at latch mechanisms (2).

Fig 1: Identifying Handle Halves, Catches And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Following parts on handle recess (1) must not be missing or damaged:

Fastener (2)

Springs (3)

Latch mechanism (4)

Fig 2: Identifying Handle Recess, Fastener, Springs And Latch Mechanism

Courtesy of BMW OF NORTH AMERICA, INC.