11 65 Turbocharger and Control
TIGHTENING TORQUE SPECIFICATION - TURBOCHARGER AND CONTROL
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Exhaust manifold to turbocharger (D80 V-band clamp). | N63O1 | M8 | Replace V-band clamp. | 13 Nm |
| 2AZ Exhaust turbocharger to primary catalytic converter (D108 V-band clamp). | N63O1 | M8 | Replace V-band clamp. | 13 Nm |
| 3AZ Heat shield to heat shield, side. | N63O1 | M6 x16 | 10 Nm | |
| 4AZ Heat shield to cylinder head cover | N63O1 | M6x12 | 10 Nm | |
| 5AZ Heat shield, bottom, to crankcase/oil return cover. | N63O1 | M6 x 12 | 10 Nm | |
| 6AZ Heat shield to crankcase. | N63O1 | M6 x 12 | 10 Nm | |
| 7AZ Exhaust turbocharger heat shield and alternator to cylinder head. | N63O1 | M6 x 12 | 10 Nm | |
| 8AZ Bracket, electropneumatic pressure converter, to cylinder head. | N63O1 | M6x18 | 10 Nm | |
| 9AZ Electropneumatic pressure converter to bracket. | N63O1 | M6 | 10 Nm | |
| 10AZ Vacuum reservoir in V-space. | N63O1 | M6 | 10 Nm |