24 40 Torque Converter (X5 M)
24 40 TORQUE CONVERTER - TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Torque converter to flywheel | GA6HP19Z/GA6HP26Z/GA6HP32Z/GA8HP45Z/GA8HP50Z/GA8HP70Z GA8HP75Z | M10 10.9 | Replace converter screws. (Remove adhesive residue from thread, if applicable) | 56 Nm |
| 2AZ Electrical machine to flywheel | GA8P70H | M10 | Replace hexagon nuts. (Remove adhesive residue from thread, if applicable) |
56 Nm |