32 00 Steering, Measurement (X5 M)
32 00 STEERING - TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Steering box to front axle support | F15/F16/F85/F86 | M10 | Replace screws. | |
| Joining torque | 24 Nm | |||
| Release all screws again | 90° | |||
| Joining torque | 56 Nm | |||
| Angle of rotation | 90° | |||
| 2AZ Electro-hydraulic converter on steering gear | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F15/F16 | 3 Nm | ||
| 3AZ Heat shield to steering gear | F15/F16 | 8 Nm | ||
| 4AZ Holder on steering gear | F01/F02/F04/F06/F07/F10/F11/F12/F13/F18 | 8 Nm | ||
| 5AZ Active steering pipe (union nut, internal line on the steering gear) | F15/F16 | M8 | 10 Nm | |
| 6AZ Active steering pipe (hold-down device hexagon socket screw, internal line on steering gear) | F15/F16 | M8 | 18 Nm |