37 13 Connecting Lines (X5 M)
37 13 HYDRAULIC LINES - TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Pressure line for front axle oscillating motor to valve block | F15/F16/F85/F86 | M8 | 35 Nm | |
| 2AZ Pressure line for rear axle oscillating motor to valve block | F15/F16/F85/F86 | M8 | 35 Nm | |
| 3AZ Pressure line (T) to valve block | F15/F16/F85/F86 | M8 | 40 Nm | |
| 4AZ Pressure line (P) to valve block | F15/F16/F85/F86 | 50 Nm | ||
| 5AZ Pressure lines to oscillating motor | F15/F16/F85/F86 | M8 | 30 Nm | |
| 6AZ Screw connection, connections pressure line | F15/F16/F85/F86 | 30 Nm | ||
| 7AZ Line holder to compression strut | F15/F16/F85/F86 | 20 Nm | ||
| 8AZ Dynamic Drive line clip to rear axle support/front axle support | F15/F16/F85/F86 | M6 | 8 Nm | |
| 9AZ Pressure line, flange screw connection | F15/F16/F85/F86 | M6 | 12 Nm | |
| 10AZ Line holder to front axle support | F15/F16/F85/F86 | 8 Nm | ||
| 11AZ ARS line to hydraulic pump/power steering pump | F15/F16/F85/F86 | 12 Nm | ||
| 12AZ ARS lines rear axle 1+2 to underfloor line 1+2 | F15/F16/F85/F86 | 30 Nm | ||
| 13AZ Screw pins for pipe holder | F15/F16/F85/F86 | 1.5 Nm |