11 65 Charger With Control (X5 M)
11 65 TURBOCHARGER AND CONTROL - TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Exhaust manifold to turbocharger (D80 V-band clamp). | S63T2 | M8 | Replace V-band clamp | 13 Nm |
| 2AZ Turbocharger to primary catalyst (D108 V-band clamp). | S63T2 | M8 | Replace V-band clamp | 13 Nm |
| 3AZ Heat shield to heat shield, side. | S63T2 | M6 x 16 | 10 Nm | |
| 4AZ Heat shield to support. | S63T2 | M6 x 16 | 10 Nm | |
| 5AZ Heat shield to heat shield, rear. | S63T2 | M6 x 16 | 10 Nm | |
| 6AZ Vacuum reservoir to heat shield. | S63T2 | M6 | 10 Nm | |
| 7AZ Heat shield to heat shield, rear. | S63T2 | M6 | Screw, captive | 10 Nm |
| 8AZ Heat shield, bottom, to crankcase/oil return cover. | S63T2 | M6 x 14 | 10 Nm | |
| 9AZ Heat shield to crankcase. | S63T2 | M6 x 22 | 10 Nm | |
| 10AZ Heat shield turbocharger and alternator to cylinder head. | S63T2 | M6 x 14 | 10 Nm | |
| 11AZ Bracket, electropneumatic pressure converter, to cylinder head. | S63T2 | M6x18 | 10 Nm | |
| 12AZ Electropneumatic pressure converter to bracket. | S63T2 | M6 | 6 Nm |