11 24 Connecting Rod With Bearing (X5 M)

11 24 CONNECTING RODS AND BEARINGS - TIGHTENING TORQUE SPECIFICATIONS

	Type	Thread	Tightening specifications	Dimension
1AZ Connecting rod bolt (new connecting rod with new connecting rod bolts)	S63T 2	M9x1.25	Loosen screws.
			Suction off crack surfaces.
			1. Joining torque	5 Nm
			2. Joining torque	20 Nm
			3. Joining torque	30 Nm
			3. Angle of rotation	75°
2AZ Special screw connection only with new connecting rod bolts.	S63T 2	M9x1.25	1. Joining torque	5 Nm
			2. Joining torque	20 Nm
			3. Joining torque	30 Nm
			4. Angle of rotation	75°
5. Loosen screw.			180°
6. Joining torque			5 Nm
7. Joining torque			20 Nm
8. Joining torque			30 Nm
9. Angle of rotation			75°
10. Loosen screw.			180°
11. Joining torque			5 Nm
12. Joining torque			20 Nm
13. Joining torque			30 Nm
14. Angle of rotation			75°