Removing and installing/replacing rear (inside) left or right door sill cover strip (X5 M)
Version without 3rd row of seats:
Unclip rear seat (1) toward the top.
Release the door sill cover strip (2) at clamp (3) and clamp (4) toward the top.
Installation note:
Replace faulty clamp (3) and clips (4).
Fit door sill cover strip (2) with preassembled clips (4).
Replacement:
Unclip insert (1) from door sill trim strip (2).
Version with 3rd row of seats:
Release the door sill cover strip (1) at clamp (2) and clips (3) toward the top.
Installation note:
Replace faulty clamp (2) and clips (3).
Fit door sill cover strip (1) with preassembled (3).
Replacement:
Unclip insert (1) from door sill trim strip (2).