LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2017 >> X5 M >> Repair and Diagnosis >> Drivelines & Axles >> Driveshaft & Universal Joints >> Propeller Shaft -- Repair X5 M (F85) >> 26 00 Prop Shaft, General >> Additional work on all-wheel drive vehicles after driving with faulty (non-engaging) drive (X5 M)

Additional work on all-wheel drive vehicles after driving with faulty (non-engaging) drive (X5 M)

IMPORTANT: If the vehicle has been shifted under engine power with a non-engaging drive system (e.g. faulty front prop shaft, or one output shaft is no longer engaging with the drive flange, rear axle differential faulty/no power transmission), it is mandatory to calibrate the transfer box after having repaired the prop shaft/output shaft(s). 

Carry out calibration after having completed the repair using the diagnostic system and information system, in control unit function -

Functional check - Transfer box.

scientia non olet · About LEMON Manuals