Removing and installing/replacing left engine compartment lid lock. (X5 M)

Unclip coupling (1) from side panel.

Lever out cover (2) at coupling (1).

Lever the cable (3) out of the coupling (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Tightening torque 51 23 2AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Add-on parts are shown removed for purposes of clarity.

Feed out engine compartment lock (1) via aperture (2) towards the rear.

NOTE: Add-on parts are shown removed for purposes of clarity.

Unhook Bowden cable (1) from engine compartment lock (2) in direction of arrow.

Courtesy of BMW OF NORTH AMERICA, INC.

Courtesy of BMW OF NORTH AMERICA, INC.